-
目录 CONTENTS2
- 主要技术规格 MAIN SPECIFICATIONS2
- 安装皮带防护罩 BELT COVER INSTALLATION3
- 试车 TRIAL RUN4
- 旋梭油量调节 ROTATING HOOK OIL AMOUNT ADKUSTMENT5
- 安装机针 INSTALLING THE NEEDLE6
- 绕线调节 WINDING INSTALLATION AND ADJUSTMENT7
- 缝线张力 ADJUSTING THE THREAD TENSION8
- 底面线张力调节 ADJUST THREAD GUIDE AND THREAD TENSION9
- 机针与旋梭同步调整 TIMING BETWEEN THE NEEDLE AND THE ROTATING HOOK10
- 旋梭装卸 REMOVING AND INSTALLING THE ROTATING HOOK11
- 送布牙平面调节 HORIZONTAL ADJUSTMENT OF FEED DOG12
- 送布同步调节 TIMING BETWEEN THE NEEDLE AND FEED DOG13
- 压脚交叉提升机构的调节 ADJUSTING WALKING FOOT AND PRESSURE FOOT14
- 摆压脚、压脚前后方向间隙的调节 ADJUSTING THE CLEARANCE BETWEEN THE WALK FOOT AND PRESSURE FOOT15
-
零件手册 PARTS BOOK16
- 机壳部件 ARM BED COMPONENTS17
- 上轴、竖轴、针杆挑线部件 NEEDLE DAR AND THREAD TADE-UP,ARM SHAFT AND VERTICAL SHAFT MECHANISM19
- 抬牙送布勾线部件 FEED AND FEED LIFTING AND ROTATING HOOK MECHANISM21
- 送布调节部件 STITCH LENGTH REGELATING MECHANISM23
- 压脚部件 PRESSER LIFTING MECHANISM25
- 上送料部件 PRESSER LIFTING FEEDING MECHNISM27
- 油泵部件 LUBRICATION MECHANISM29
- 附件 ACCSSORIES31
-
0303D/6202D系列直驱上下复合送料自动剪线平缝机使用说明/零件手册33
- 机器简介 Brief introduction36
- 安装机头 Installing the machine head37
- 调整膝控装置 Adjusting knee lifter38
- 试车 Test operation39
- 安装机针 Installing the needle 40
- 穿底线 Threading the bobbin therad41
- 调节针距 Adjusting the stitch length42
- 调节线的张力 Adjusting the thread tension43
- 调节剪线后线头的长度 Adjusting the trailing length after thread trimming44
- 调节机壳线勾 Adjusting the upper thread guide45
- 调节送布牙的角度 Adjusting the feed dog angle46
- 调节机针与送布机构同步 Adjusting the timing of needle and feed mechanism47
- 调整机针高度与旋梭同步 Adjusting the height of needle bar and the timing with hook48
- 调节摆压脚与小压脚交替提升量 Adjusting the lifting amount of presser feet49
- 剪线装置的调整 Adjusting the trimming mechanism 50
- 安装剪线电磁铁51
- 清扫 Clean52
- 零件手册 Parts manual53
- 机壳部件 Casting mechanism54
- 针杆，挑线部件 Needle bar and thread take-up mechanism56
- 压脚部件 Presser foot mechanism 58
- 送料部件 Feed mechanism 60
- 上送料部件 Upper feed mechanism 64
- 旋梭部件 Hook mechanism 66
- 供油润滑部件 Lubrication mechanism68
- 剪线部件 Thread trimming mechanism70
- 倒缝部件 Reverse stitching mechanism72
- 0303D附件 Reverse stitching mechanism74
- 202附 件 Accessories76
- 8808 电脑直驱钉扣机78